Buying a home in Arlington and not sure whether you need an appraisal, an inspection, or both? You are not alone. These two steps often happen around the same time, but they serve different purposes and help different decision makers. In this guide, you will learn what each one covers, typical timelines and costs in Tarrant County, local issues to watch, and how to keep everything on track from contract to close. Let’s dive in.
Appraisal vs. inspection: the quick answer
An appraisal estimates a home’s market value for your lender. A home inspection evaluates the visible condition of the home for you as the buyer. The Consumer Financial Protection Bureau explains the difference between an appraisal and a home inspection.
- Appraisal: value and market risk for the lender.
- Inspection: condition and safety for the buyer.
- You usually need both to make an informed decision and to satisfy the lender.
Who orders and who pays
- Appraisal: Your lender orders it after you go under contract. You pay the fee as part of your loan costs. Appraisers must follow USPAP standards.
- Inspection: You or your agent hire the home inspector directly and pay for it out of pocket. Many inspectors follow the InterNACHI Standards of Practice or the ASHI Standards of Practice.
For a primer on what an appraisal is and why lenders require it, see the CFPB’s guide on what an appraisal is.
What each one covers (and does not)
Both reports are snapshots. The appraisal focuses on value and marketability. The inspection focuses on the home’s visible condition and safety. Here is how that plays out in Arlington homes:
Roof condition
- Inspection: Reports visible wear, leaks, hail impacts, and estimated age. May suggest a roofer’s evaluation.
- Appraisal: Notes condition only as it affects value and marketability. Severe issues can reduce value.
Foundation and settlement
- Inspection: Flags cracks, sloping, sticky doors, and grading issues. Often recommends a structural engineer if movement is significant.
- Appraisal: May adjust value for visible defects and will note market impact.
- Specialist: A licensed structural engineer provides the diagnosis and repair scope.
HVAC, plumbing, and electrical
- Inspection: Tests accessible systems and identifies safety concerns.
- Appraisal: Notes obvious defects that affect livability or value. Does not diagnose.
Termites and wood-destroying insects
- Inspection: May note signs and recommend a pest inspection.
- Specialist: A licensed pest professional provides a formal WDI report. Lenders can require proof of treatment or repairs if damage affects safety.
Pools and spas
- Inspection: Checks visible equipment, decking, and basic safety; a specialty pool inspection can go deeper. See InterNACHI’s overview of pool and spa inspections.
- Appraisal: Treats the pool as an amenity and considers condition when valuing the property.
Code, permits, and additions
- Inspection: May identify suspected unpermitted work but will not confirm legal status.
- Appraisal: Can adjust value if additions appear nonconforming.
- Specialist: The city permit office can verify permits.
Bottom line: an appraisal will not replace a home inspection, and an inspection will not tell you market value.
Typical timelines in Arlington
- Inspection period: In Texas, buyers often have an option period. Best practice is to schedule your home inspection within 1 to 3 business days after the contract is signed. This leaves time for specialist follow-ups and negotiations.
- Appraisal timing: Your lender orders the appraisal after loan application and receipt of the contract. Turn time is often 3 to 14 days from order to completed report, but it can vary with volume and property complexity.
- Order of events: Inspections usually happen before the appraisal finishes, and often before the appraisal visit. Lenders still need the appraisal regardless of inspection results.
Typical costs in Tarrant County
- Home inspection: About $300 to $600 for a typical single-family home. Age, size, and extras like pools can increase the price.
- Specialty inspections: Often $75 to $600 each depending on type and scope. Examples include termite, sewer scope, roof certification, HVAC, structural engineer, and pool.
- Appraisal: About $400 to $800 for a standard single-family property. Unique or complex homes may be higher.
These are common local ranges. Actual fees vary by company and property.
Arlington issues to watch
Expansive clay soils and foundations
Northern Texas soils can expand and contract with moisture, which can move slabs and piers. Inspectors look for settlement signs and drainage problems. If there are concerns, a structural engineer can assess severity and outline repairs.
Termites and wood-destroying insects
Arlington’s warm climate supports termite activity. A separate WDI inspection is common, and lenders may require treatment or repairs if damage affects livability.
Hail, wind, and roof age
The DFW area experiences hailstorms and strong sun. Inspectors often flag worn shingles, prior hail impacts, and aging flashings. Appraisers consider roof condition relative to comparable sales.
Pools and backyard structures
Many homes include pools or sheds. Pools add inspection scope and can influence value depending on condition and buyer demand.
Floodplain and drainage
Some neighborhoods fall within mapped floodplains or have seasonal drainage patterns. Check FEMA’s Flood Map Service Center. The City of Arlington also provides local floodplain resources to help you verify risk and insurance needs.
How to coordinate appraisal and inspection
Use this simple checklist to keep your lender, appraiser, and inspector aligned:
At contract acceptance
- Confirm your option period and inspection deadlines.
- Schedule the home inspection within 24 to 72 hours.
- Send the signed contract to your lender so they can start processing and order the appraisal.
- Share seller disclosures and property history with your inspector.
During the inspection phase
- Review the inspection report as soon as it arrives. Most arrive within 24 to 72 hours.
- If major issues appear, order specialty inspections or contractor bids right away.
- If repairs could affect lender requirements, let your lender know early.
Appraisal coordination
- Make sure the appraiser has access. Provide lockbox details through the proper channels.
- Prepare a simple package for the appraiser: signed contract, recent updates with receipts or permits, and any relevant HOA or neighborhood details.
- If you and the seller agree on repairs or credits, share the signed addendum with your lender and be ready to document completed work.
Before closing
- If the appraisal is subject to repairs, collect invoices, photos, and completion letters.
- If needed, obtain termite clearance or roof certifications before your loan’s final review.
Common problem scenarios and what to do
- Low appraisal after inspection finds deferred maintenance. You can request a reconsideration of value with better comparable sales, share proof of recent repairs, renegotiate price, pay the difference in cash, or cancel based on your contract terms.
- Suspected foundation movement. Follow the inspector’s recommendation for a structural engineer. Negotiate repairs, credits, or a price change using written bids.
- Termite damage or active infestation. Order a WDI report and plan for treatment and repairs. Lenders may ask for proof before closing.
- Seller pushback on repairs. Focus on material, structural, or safety items. Written estimates from licensed contractors help your case.
Property tax appraisal vs. mortgage appraisal
Do not confuse the Tarrant Appraisal District’s taxable value with a lender-ordered appraisal. TAD sets taxable values for property taxes and does not determine market value for your loan. If you want to review your property’s tax appraisal, visit the Tarrant Appraisal District. Your lender’s appraisal is an independent report used to support your mortgage amount.
The bottom line for Arlington buyers
You need both an appraisal and an inspection. One protects your lender from value risk. The other protects you from condition risk. When you schedule your inspection early, share documentation with your lender and appraiser, and handle repairs with licensed specialists, you reduce surprises and keep your closing on track.
If you want local guidance from contract to close, reach out to The Kinn Team. Our Arlington and North Tarrant expertise helps you move with clarity and confidence.
FAQs
What is the difference between an appraisal and an inspection in Arlington?
- An appraisal estimates market value for your lender, while a home inspection evaluates the visible condition and safety of the home for you as the buyer.
Who orders and pays for the appraisal and inspection in Texas?
- The lender orders the appraisal and you pay the fee as part of loan costs; you or your agent hire and pay the home inspector directly.
How long do appraisals and inspections take in Tarrant County?
- Inspections are usually scheduled within 1 to 3 business days after contract and reported within 24 to 72 hours; appraisals often take 3 to 14 days from order to report.
What are typical costs for Arlington buyers?
- Home inspections commonly cost $300 to $600 plus any specialty add-ons; appraisals often run $400 to $800, with higher fees for complex properties.
Do I still need an inspection if the home appraises well?
- Yes. A strong appraisal does not evaluate system safety or hidden defects; the inspection protects you by identifying condition issues.
How do flood zones in Arlington affect my purchase?
- Flood zones can impact insurance and lender requirements; use FEMA’s Flood Map Service Center and local resources to confirm a property’s risk status.
Can I challenge a low appraisal on my Arlington home purchase?
- You can ask your lender about a reconsideration of value by providing better comparable sales and documentation of recent repairs or improvements.